Raw material: LDPE, GMS, TAC, Talc, Butane or Natural Gas
Capacity: 80-120kg/hr
Certification: CE, ISO9001
Skype:lewis15863824208
EPE Foam Pipe /Stick Extrudsion Line Introduction:
EPE foam pipe is a kind of new-type foam material and it is widely used in the jacket of air conditioner ,pipeline ,heat insulation ,toy guardrail , recreation places etc. Due to its high foaming ratio, good elasticity and insulation . As a kind of new type foam filling and stem and ornament material .
EPE foam stick is widely used in spring mattress, sofa stem and edge , automobile seat, sofa back rest and top-grade clothing. It is also widely used in the filling of contracting joint in building due to its good rebound elasticity.
Principle of EPE Foam Pipe /Stick Extrudsion Line:
The L/D of EPE Foam Pipe /Stick Extruder ‘s screw is 55 : 1.The raw material is high pressure and low density polyethylene . Through extruding system basis on formulation the raw material and the auxiliary material are transported into hopper by auto feeding system. The GMS will be injected into barrel by the pump as anti-contractor agent . Butane pump inject the liquid butane into the screw barrel and foam .The temperature is dropped by the barrel then the products will be extruded from the machine head.
Main Technical Parameters of EPE Foam Pipe/Stick Extrusion Line |
Model: | Unit | FC-75 | FC-90 |
L/D: | | 55:1 |
Screw Speed: | r/min | 5-60 |
Foaming Ratio: | | 10-40 | 10-40 |
Outer Diameter: | mm | ∮50 | ∮90 |
Inner Diameter: | mm | ∮10-20 | ∮20-40 |
Cooling Method: | water,cooling |
Capacity: | kg/h | 40-50 | 70-80 |
Installed Power: | kw | 28 | 32 |
Dimension: | m | 1.5×1.3×1.7 | 1.6×1.3×1.7 |
Total weight: | t | 6 | 6.5 |
|
|
EPE Foam Pipe /Stick Extrudsion Line (FC-90) Images
|
