Raw material: LDPE, GMS, TAC, Talc, Butane or Natural Gas
Capacity: 80-120kg/hr
Certification: CE, ISO9001
Skype:lewis15863824208
Flower water noodle EPE Foam Extruder(FC-75) Specification:
The EPE Material is soft and floating
Colorful and harmless
It helps people play in water to have fun
Water noodle is EPE foam tub, it is lighter,flooting on the water and environment-friendly. our product has closed structure, low cost and light weight, already widely used as swimming toys. Over the years, we have won CE and ISO certificate, consumer trust and favourites, keeping promises, and other awards.
Principle of EPE swimming ring Extruder:
The L/D of EPE Foam Pipe /Stick Extruder ‘s screw is 55 : 1.The raw material is high pressure and low density polyethylene . Through extruding system basis on formulation the raw material and the auxiliary material are transported into hopper by auto feeding system. The GMS will be injected into barrel by the pump as anti-contractor agent . Butane pump inject the liquid butane into the screw barrel and foam .The temperature is dropped by the barrel then the products will be extruded from the machine head.
You can know more about Flower water noodle EPE Foam Extruder from the video link: | Main Technical Parameters of Flower water noodle EPE Foam Extruder: |
| Model: | Unit | FC-75 | FC-90 |
| L/D: | | 55:1 |
| Screw Speed: | r/min | 5-60 |
| Foaming Ratio: | | 10-40 | 10-40 |
| Outer Diameter: | mm | ∮50 | ∮90 |
| Inner Diameter: | mm | ∮10-20 | ∮20-40 |
| Cooling Method: | water,cooling |
| Capacity: | kg/h | 40-50 | 70-80 |
| Installed Power: | kw | 28 | 32 |
| Dimension: | m | 1.5×1.3×1.7 | 1.6×1.3×1.7 |
| Total weight: | t | 6 | 6.5 |
|
|
Flower water noodle EPE Foam Extruder(FC-75) Images
|
